Injection Mold Maintenance Plan

- Jul 27, 2017-

  Injection Mold Maintenance Plan

  Injection mold maintenance is not only about the quality of mold life, the production plan also has a significant impact, and even the final cost of manufacturing.

  Daily responsible for the maintenance of mold maintenance work must be careful, careful work, and ensure that the best mold status, has been done in the production of effective, economic, as far as possible to reduce the cost of manufacturing. So how to improve the maintenance of the mold to do it! Let's learn from the following.

  First of all, maintenance information: Injection mold maintenance, you need to follow the drawings check parts. Even if there is no special instructions, it should be checked in the storage, and not be allowed to modify the size of the die parts which do not conform to the drawings. Also can not use pads or gaskets for insertion and so on; after completion of the production order mold maintenance, must refer to the production department to provide the problem points, production department records and the final product; in the mold maintenance, if the discovery of major problems, should immediately report to the superior supervisor, and wait for instructions.

  Second, the specific requirements for the maintenance of injection mold: In the replacement of the mold parts, confirm the replacement of the quality of the components, the parts disassembly, assembly to tap, slow pressure, mold inserts assembly, to confirm the clearance of qualified; avoid the parts surface without curling, scratches, concave points, dross, defects, rust and so on; if the replacement of parts, timely with the mold design department to communicate and confirm, to remove the mold before and after the attention to maintain the various parts pulling balance;

  Finally, the daily maintenance of the injection mold must be carefully and carefully carried out to ensure that the mold at all times to maintain the best status.

Previous:Analysis On The Development Of Injection Mold In China Next:Several Ways Of Injection Mold Processing Drive